‹ › 2D / 3D & BIM Takeoff › E3D failed to initialize › Reply To: E3D failed to initialize
25 Mar 2021 at 3:54 am (GMT+0000+0)
#1827
RIB CostX
Moderator
Hi uhguanhong,
Thank you for your post.
You can change the Graphic Driver setting in iTWO costX by clicking File -> Options -> Drawings and changing the Graphic Driver value from OpenGL to Direct3D, clicking OK and then restart iTWO costX.
It should resolve the issue.
Hope this helps!
Regards,
iTWO costX Forum Admin